- Resetting Your Maintenance Light
- What To Do If It Doesn’t Work
- Maintenance Tips for Your Toyota Tundra Truck
On Toyota Tundra, the “Maintenance Required” light goes off every 5,000 miles. It usually does this to remind you to change your oil at any Toyota service center near you. This light displays automatically after the last time it was reset or after 5,000 miles. But after an oil change, the light will stay on until you turn it off.
This maintenance light is present on all Tundra pickup trucks, so you should see this light at some point whether you have a new or a used vehicle.
Resetting Your Maintenance Light
It is essential to reset the maintenance light after changing your oil. In some cases, the service center may do the reset for you without asking. However, it isn’t always the case. You may still need to do it by yourself.
Note that there are different methods to reset the maintenance light, depending on the model you are driving. The first thing you need to do is to read the owner’s manual. After changing the oil, the reset procedure can be done successfully. Luckily, it does not require supplies or tools. Below are the steps to reset maintenance light on Toyota Tundra according to their year of release:
2000 to 2006 Toyota Tundra Maintenance Light Reset
After changing the oil on the truck, don’t start the engine. Rather, place the key in the ignition at the “On” position.
For push-button models, don’t touch the brake pedal. Simply press “Start.” When this is done, press the “Trip” button by switching the display to your odometer mileage.
After doing this, turn off the vehicle all the way. Press and continue to hold the “Trip” button. Still, don’t start the engine as you continue holding it. Switch the ignition to “On” and when you see that the trip meter is all zeros, you can release the button.
2007 to 2017 Toyota Tundra Maintenance Light Reset
In this model, turn your ignition but don’t start the engine. Place it at the “On” position. For push-button models, just press “Start” without pressing the brake pedal. Next press the “Trip” button to switch the dashboard display to “Trip A.” Then turn off the car completely.
Press the “Trip Button” and continue to hold it. Do not start the engine, but switch the ignition from its position to “On” the trip meter should change to all zeros. When this happens, release the “Trip” button.
2018 Toyota Tundra Maintenance Light Reset
This one is rather straightforward. Just select “Vehicle Settings” on the display. Next, click on “Maintenance Reset” and press “Yes” to confirm.
What To Do If It Doesn’t Work
You can troubleshoot to find out why it didn’t work. If you have followed all the steps to reset the lights, it should turn off immediately. However, you can try out a few things to fix the problem.
- Check your odometer again to ensure that it is properly set. When you confirm that it is set correctly, try the steps that apply to your car model again.
- If it still fails and the maintenance light stays on, then you should disconnect the battery from the car. After disconnecting it, wait for a few minutes and then connect it back. The truck’s internal computer will reset itself.
- If the light stays on, then go over your owner’s manual again to see if you missed any steps. You can also visit a Toyota dealership for expert support.
Maintenance Tips for Your Toyota Tundra Truck
It is essential to maintain your truck so it can serve you for a longer time and you can save money on repairs. Also, If you want to sell the car, the resale value will be higher. Here are some ways to maintain your truck to keep it running in optimum condition.
Consult Your Owner’s Manual
Before doing anything to your vehicle, be sure to read the manual first. The manual contains first-hand information on how to maintain the truck.
Look out for correct gas and oil usage tips, maintenance schedules, and information on in-car entertainment. Following the manual can also help you diagnose a problem with your truck.
Follow the Maintenance Schedule
After reading the owner’s manual, implement the tips on the proper schedule for vehicle maintenance. Don’t set your own schedules, rather follow the recommendations of the manufacturers.
You can also choose to maintain the vehicle by yourself or take it to a Toyota service center. However, work on the maintenance only if you have experience working on trucks of that model.
Whatever the case, do not skip the truck’s maintenance routine.
Today, newer cars are more technologically advanced and motor oils can last longer without needing to be changed. In some cases, new engine models can reach 7,000 miles before you need to change the oil.
The owner’s manual will help you determine when your truck should be serviced. Also, it will recommend the best maintenance tips. It is also important to note that the interval between every oil change depends largely on the type of engine oil you use.
Use the Right Octane Level
Again, the owner’s manual can help you determine the fuel rating that’s best for your vehicle. If you exceed the right octane level, it can affect your vehicle’s performance drastically.
Inspect Tires Regularly
It is essential to inspect your tires regularly to ensure that they are in good working conditions. It can increase the lifespan of the tire and also reduce the risk of road accidents.
Check Engine Light
Don’t confuse your maintenance indicator for your “Check Engine” light. The latter often means there is a problem with your engine. It is ideal to visit an auto shop to get the problem detected and fixed.
If you choose to check for yourself, you may need a code reader.
Your Toyota Tundra “Maintenance Light” can be turned off manually after changing your oil. However, if it does not go off, then you can try the process outlined above again. If you still experience any difficulty, then contact a Toyota service center to check and fix the problem.